Part Details | SHOULDERED SHAFT
3040-01-500-7316 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7018029002, 7018029-002, 7018029, 7018029002, 7018029-002, 3040-01-500-7316, 01-500-7316, 3040015007316, 015007316
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 09, 2002 | 01-500-7316 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-500-7316
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7018029-002 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 7018029 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 7018029-002 | 00724 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 3040-01-500-7316
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END DIAMETER | 0.3060 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 INTERNAL THREADED |
| SECOND END DIAMETER | 0.3690 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM |
| SECOND END STEP LENGTH | 0.600 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN FLATS | 90.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 0.557 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| OVERALL LENGTH | 2.890 INCHES MINIMUM AND 2.893 INCHES MAXIMUM |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | NEAR FIRST END, PROVIDED WITH 0.500-20UNC-2A LEFT HAND THREADS X 0.675 LONG |
| END ITEM IDENTIFICATION | USED ON CEC & CES. NEXT HIGHER ASSEMBLIES 7017844, 7018093, & 7018094 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,LATCH |