Part Details | SHOULDERED SHAFT
3040-01-500-7923 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: H525760810, H525-7608-10, 501706664610, 501-7066646-10, 5017066646, 501-7066646, 3040-01-500-7923, 01-500-7923, 3040015007923, 015007923
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 11, 2002 | 01-500-7923 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
SPLINED (STRAIGHT)
FLAT KEYWAY
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-500-7923
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H525-7608-10 | 96169 | ELECTRIC BOAT CORPORATION |
| 501-7066646-10 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 501-7066646 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-500-7923
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | NICKEL ALLOY K-500 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM 2 CONDITION ANNEALED(COLD DRAWN) & AGE HARDENED FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 1.190 INCHES MINIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.6290 INCHES MINIMUM AND 0.6390 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.7470 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.1200 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.4500 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 1.290 INCHES NOMINAL |
| SECOND END DIAMETER | 0.5620 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 1.290 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL |
| OVERALL LENGTH | 14.030 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | SECOND SHAFT END PROVIDED WITH TAPERED 0.775 INCH SQUARE X 0.870 INCH LONG AFTER GROOVE |
| END ITEM IDENTIFICATION | MANUAL REMOTE OPERATOR FOR AHP-33 USED ON LOS ANGELES CLASS SSN (688) |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT |