Part Details | SHOULDERED SHAFT
3040-01-504-7559 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6394776 FIND 13, 58157935391, 581-5793539-1, 5815793539, 581-5793539, 57935391, 5793539-1, 57935391, 5793539-1, 3040-01-504-7559, 01-504-7559, 3040015047559, 015047559
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 07, 2003 | 01-504-7559 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
FLAT KEYWAY
TAPERED WITH FLAT
FLAT KEYWAY
Cross Reference | NSN 3040-01-504-7559
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6394776 FIND 13 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 581-5793539-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 581-5793539 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5793539-1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5793539-1 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Technical Data | NSN 3040-01-504-7559
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLAT KEYWAY |
| MATERIAL | NICKEL ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B446 INCONEL 625,FORM:1 CONDITION:ANNEALED ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END KEYWAY WIDTH | 0.1300 INCHES NOMINAL |
| FIRST END EXTERNAL KEYWAY LENGTH | 0.120 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.155 INCHES NOMINAL |
| FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.4978 INCHES MINIMUM AND 0.4999 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1390 INCHES MINIMUM AND 0.1440 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.110 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 6.590 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| END ITEM IDENTIFICATION | ANCHOR ASSEMBLY,FORWARD |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,ROLLER,DAMPER |