Part Details | SHOULDERED SHAFT
3040-01-505-5861 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: B83142009, B831-4200-9, 7409702, 59674097029, 596-7409702-9, 3040-01-505-5861, 01-505-5861, 3040015055861, 015055861
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 11, 2003 | 01-505-5861 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-505-5861
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| B831-4200-9 | 96169 | ELECTRIC BOAT CORPORATION |
| 7409702 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 596-7409702-9 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-505-5861
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A564, TYPE-630, CONDITION-H1025 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM-A484 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.880 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.4800 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.7500 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 8 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 PLAIN |
| SECOND END DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SECOND END WIDTH ACROSS FLATS | 0.560 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| SECOND END STEP LENGTH | 1.190 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL |
| OVERALL LENGTH | 7.880 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | SPLINE END OF SHAFT HAS RECESSED SQUARE DRIVE END STYLE, MEASUREMENTS: +.628, -.627 SQUARE ACROSS FLATS BY .91 DEEP. |
| END ITEM IDENTIFICATION | SEAWOLF CLASS SUBMARINE SSN 23, ROV/PACKAGE & MODULE CRADLE ASSEMBLEY |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT DRIVER |