Part Details | SHOULDERED SHAFT
3040-01-506-5790 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6394966, 6394775 FIND 3, 63949661, 6394966-1, 3040-01-506-5790, 01-506-5790, 3040015065790, 015065790
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 03, 2003 | 01-506-5790 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-506-5790
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6394966 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 6394775 FIND 3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 6394966-1 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Technical Data | NSN 3040-01-506-5790
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 PLAIN |
| MATERIAL | NICKEL ALLOY K-500 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-286 FORM:1 CONDITION:ANNEALED FED STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 1.4972 INCHES MINIMUM AND 1.4988 INCHES MAXIMUM |
| FIRST END WIDTH ACROSS FLATS | 1.160 INCHES MINIMUM AND 1.165 INCHES MAXIMUM |
| FIRST END STEP LENGTH | 0.936 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 2.500 INCHES NOMINAL |
| OVERALL LENGTH | 21.920 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | REPLY TO MRC REFLECT CHANGES TO REVISION E. PROVIDED WITH 0.250 WIDE X 0.500 DEEP AXIAL GROOVE ON 2.500 DIAMETER PORTION OF SHAFT, 18.010 INCH LONG |
| END ITEM IDENTIFICATION | ASDS, NEXT HIGHER ASSEMBLY 6394775 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,DRUM |