Part Details | SHOULDERED SHAFT
3040-01-507-2349 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 93016B4302, 38517516 1706H, 38517-516 1706H, 93016B4302, 3040-01-507-2349, 01-507-2349, 3040015072349, 015072349
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 23, 2003 | 01-507-2349 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-507-2349
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 93016B4302 | 25567 | GORMAN-RUPP COMPANY, THEDBA MANSFIELD DIVISION |
| 38517-516 1706H | 25567 | GORMAN-RUPP COMPANY, THEDBA MANSFIELD DIVISION |
| 93016B4302 | 01365 | MARINE CORPS LOGISTICS COMMANDTECHNICAL DATA REPOSITORY |
Technical Data | NSN 3040-01-507-2349
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 FLAT KEYWAY |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | TYPE 17-4 PH, ASTM A564, COND H ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0860 INCHES MINIMUM AND 0.0910 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 2.0260 INCHES MINIMUM AND 2.0380 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 7.073 INCHES MINIMUM AND 7.074 INCHES MAXIMUM |
| FIRST END DIAMETER | 2.1655 INCHES MINIMUM AND 2.1660 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 2.630 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.9825 INCHES MINIMUM AND 0.9835 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 2.1655 INCHES MINIMUM AND 2.1660 INCHES MAXIMUM |
| OVERALL LENGTH | 18.370 INCHES MINIMUM AND 18.390 INCHES MAXIMUM |
| STEP QUANTITY | 6 |
| CRITICALITY CODE JUSTIFICATION | AAMFZ$$AAMDL$$ACSPY |
| END ITEM IDENTIFICATION | USED ON 4320-01-506-7996; END ITEM IS FUEL PUMP, 600 GPM (FU604G) 4930-01-392-7579 |
| SUPPLEMENTARY FEATURES | MATERIAL IS STAINLESS STEEL BAR, 2.25 DIA TYPE 17-4 PH, ASTM A564, COND. H HEAT TREAT TO H-1025; HARDENING PROCESS IS HEAT TO 1025 F FOR 4 HOURS AND AIR DRY; ROCKWELL HARDNESS C 35-42; THREADED END 1.250-12 UNF-3A; OIL RETURN GROOVE 0.09 WIDE X 0.03 DEEP X 0.25 PITCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,IMPELLER |