Part Details | SHOULDERED SHAFT
3040-01-507-7846 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: H79170002, H791-7000-2, 7015844, 55670158442, 556-7015844-2, 3040-01-507-7846, 01-507-7846, 3040015077846, 015077846
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 06, 2003 | 01-507-7846 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-507-7846
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| H791-7000-2 | 96169 | ELECTRIC BOAT CORPORATION |
| 7015844 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 556-7015844-2 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-507-7846
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | COPPER ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-637 ALY 464 1 TO 2H FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 INTERNAL THREADED |
| SECOND END DIAMETER | 0.7900 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.500 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 6.125 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | ALSO HAS HOLE DRILLED THROUGH IT'S LENGTH AT 0.410 IN. DIAMETER; IS PART OF A TOOL ASSEMBLY |
| END ITEM IDENTIFICATION | NSSN CLASS SUBMARINE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PULL ROD |