Part Details | SHOULDERED SHAFT
3040-01-521-3107 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 323913, 3040-01-521-3107, 01-521-3107, 3040015213107, 015213107
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 17, 2004 | 01-521-3107 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
FLAT KEYWAY
TAPERED WITH FLAT
FLAT KEYWAY
Cross Reference | NSN 3040-01-521-3107
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 323913 | 62983 | EATON AEROSPACE LLC |
Technical Data | NSN 3040-01-521-3107
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 1 FLAT KEYWAY |
| MATERIAL | STEEL |
| FIRST END GROOVE WIDTH | 1.6720 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.2500 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.8300 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.0780 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.403 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.125 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.440 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.299 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| OVERALL LENGTH | 3.349 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | FIRST END HAS 0.109 DIA HOLE 0.45 INCHES DEEP; SHAFT HAS .095 DIA CROSSDRILLED HOLE THRU; 1.651 INCHES CENTER OF SHAFT'S CROSSDRILLED HOLE TO FIRST END; T.O. 9H7-3-14-3 FIG 5-4 IND 35 AND 52; USED ON HYDRAULIC POWER TRANSFER PACKAGE ASSEMBLY |
| END ITEM IDENTIFICATION | C5 ACFT |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, CYLINDER BEARING |