Part Details | SHOULDERED SHAFT
3040-01-537-6565 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7002822, 3040-01-537-6565, 01-537-6565, 3040015376565, 015376565
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 16, 2006 | 01-537-6565 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLATTED
PLAIN
FLATTED
Cross Reference | NSN 3040-01-537-6565
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7002822 | 15090 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 3040-01-537-6565
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLATTED |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END FLAT DEPTH | 0.0520 INCHES NOMINAL |
| FIRST END DIAMETER | 0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 9 PLAIN |
| SECOND END TONGUE THICKNESS | 0.118 INCHES MINIMUM AND 0.123 INCHES MAXIMUM |
| SECOND END TONGUE WIDTH | 0.210 INCHES MINIMUM AND 0.212 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.2100 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM |
| SECOND END STEP LENGTH | 0.390 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| OVERALL LENGTH | 5.500 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | ITEM USED ON DETENT ASSY IN LAU-128 AND LAU-129 LAUNCHERS; IT IS PART OF ECP L-039; TONGUE NED HAS 0.097 DIA CROSS DRILLED THRU HOLE |
| END ITEM IDENTIFICATION | LAU-128 AND LAU-129 LAUNCHERS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, SHOULDERED |