Part Details | SHOULDERED SHAFT
3040-01-567-8871 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 8226297, 3040-01-567-8871, 01-567-8871, 3040015678871, 015678871
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | OCT 09, 2008 | 01-567-8871 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-567-8871
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8226297 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-567-8871
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A 564 17-4 PH H1150 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 34.0 MICRONS |
| FIRST END DIAMETER | 0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.2480 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 1.250 INCHES MAXIMUM |
| OVERALL LENGTH | 1.252 INCHES MINIMUM AND 1.256 INCHES MAXIMUM |
| STEP QUANTITY | 1 |
| SPECIAL FEATURES | LENGTH, 1ST END 1.128, 2ND END .126 INCH |
| END ITEM IDENTIFICATION | TOW SHEAVE ASSEMBLY |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RELEASE ARM PIVOT |