Part Details | SHOULDERED SHAFT
3040-01-571-3060 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6386335, 6386335, 3040-01-571-3060, 01-571-3060, 3040015713060, 015713060
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 30, 2009 | 01-571-3060 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-571-3060
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6386335 | 4U884 | RAYTHEON COMPANYDBA RAYTHEON |
| 6386335 | 3U331 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 3040-01-571-3060
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL COMP 303SE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5738 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.3118 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 0.300 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.1865 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.312 INCHES NOMINAL |
| OVERALL LENGTH | 0.985 INCHES MINIMUM AND 0.995 INCHES MAXIMUM |
| STEP QUANTITY | 1 |
| SPECIAL FEATURES | SURFACE TREATMENT IS PASSIVATE PER ASTM A967,NITRIC 1; FIRST END HAS 0.112-40 UNC-3B THREADS; REFER TO DRAWING FOR ADDITIONAL DETAILS |
| END ITEM IDENTIFICATION | 1680-01-519-8998 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,BAND DRIVE |