Part Details | SHOULDERED SHAFT
3040-01-590-9815 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 33307401081, 33307-40108-1, 3040-01-590-9815, 01-590-9815, 3040015909815, 015909815
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 05, 2011 | 01-590-9815 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-590-9815
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 33307-40108-1 | 97384 | AAI CORPORATIONDBA TEXTRON SYSTEMS |
Technical Data | NSN 3040-01-590-9815
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 TYPE 17-4 PH, COND A ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END GROOVE WIDTH | 0.0400 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.072 INCHES NOMINAL |
| FIRST END DIAMETER | 0.5860 INCHES MINIMUM AND 0.5880 INCHES MAXIMUM |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 3.693 INCHES NOMINAL |
| SPECIAL FEATURES | IEM HAS A 0.060 SLOT IN THE 1ST END ONLY; FROM 1ST END ITEM IS 0.587 IN DIA FOR 0.717 THEN THE DIA IS 0.812 FOR 0.097, THEN DIA IS 1.000 FOR 0.379, THEN DIA IS 0.808 FOR 0.995, WHERE THE DIA BECOMES 0.66 FOR 0.22 MAX, THEN IT HAS 0.75-16 UNF-2A THREADS FOR 0.29, THEN THE DIA IS 0.559 FOR 0.883, THEN THERE IS THE 0.040 WIDE GROOVE THEN AFTER THE GROOVE THE DIA IS 0.587 TO THE END. |
| END ITEM IDENTIFICATION | LGM-30 MINUTEMAN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | STUD, SPROCKET HSG |