Part Details | SHOULDERED SHAFT
3040-01-619-6464 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 43042003042, 43042-00304-2, 3040-01-619-6464, 01-619-6464, 3040016196464, 016196464
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 11, 2013 | 01-619-6464 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
FLATTED
FLAT KEYWAY
FLATTED
Cross Reference | NSN 3040-01-619-6464
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 43042-00304-2 | 02591 | NAVAL AIR WARFARE CTRAIRCRAFT DIV |
Technical Data | NSN 3040-01-619-6464
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 FLATTED |
| MATERIAL | STEEL COMP 8620 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8690 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END KEYWAY WIDTH | 0.25 INCHES NOMINAL |
| FIRST END EXTERNAL KEYWAY LENGTH | 0.25 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.07 INCHES NOMINAL |
| FIRST END DIAMETER | 0.745 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.69 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | FLAT KEYWAY |
| SECOND END KEYWAY WIDTH | 0.312 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 1.50 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.151 INCHES NOMINAL |
| SECOND END DIAMETER | 1.249 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 2.00 INCHES NOMINAL |
| OVERALL LENGTH | 7.13 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| END ITEM IDENTIFICATION | AN/SPN-43 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,SHOULDERED |