Part Details | SHOULDERED SHAFT
3040-01-626-5740 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 16172, 3040-01-626-5740, 01-626-5740, 3040016265740, 016265740
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 14, 2014 | 01-626-5740 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-626-5740
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 16172 | 06177 | PNEUDRAULICS, INC. |
Technical Data | NSN 3040-01-626-5740
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 TAPERED WITH FLAT |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CONDITION H FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| FIRST END BEARING SEAT LENGTH | 0.060 INCHES NOMINAL |
| FIRST END BEARING SEAT DIAMETER | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| FIRST END DISTANCE FROM BEARING SEAT TO END | 0.020 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 0.24 INCHES MINIMUM AND 0.26 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| OVERALL LENGTH | 0.155 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| STEP QUANTITY | 1 |
| SPECIAL FEATURES | SHAFT HAS A 0.030 INCH DIAMETER THRU HOLE. SHAFT IS PASSIVATED PER MIL-S-5002. |
| END ITEM IDENTIFICATION | VARIOUS C5 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SPRING GUIDE |