Part Details | SHOULDERED SHAFT
3040-01-642-9264 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7377567, 7225837 ITEM 1, 3040-01-642-9264, 01-642-9264, 3040016429264, 016429264
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 13, 2015 | 01-642-9264 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-642-9264
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7377567 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 7225837 ITEM 1 | 53711 | NAVAL SEA SYSTEMS COMMAND |
Technical Data | NSN 3040-01-642-9264
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END TAPER MAJOR DIAMETER | 19.0 MILLIMETERS NOMINAL |
| FIRST END TAPER LENGTH | 4.0 MILLIMETERS NOMINAL |
| FIRST END SLOT WIDTH | 19.0 MILLIMETERS NOMINAL |
| FIRST END HOLE DIAMETER | 10.0 MILLIMETERS NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| LARGEST STEP DIAMETER | 16.0 MILLIMETERS NOMINAL |
| OVERALL LENGTH | 104.0 MILLIMETERS NOMINAL |
| STEP QUANTITY | 2 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT,SHOULDERED |