Part Details | ANNULAR BALL BEARING
3110-00-278-7176 A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
Alternate Parts: 56188, PS56188, 56188, WD3L00CS5411J, WD3L00CLR5411, WD3L00CAS5556J99YH, WD3L00CALR5411, WD3L000A, WD3L00CS5411J, WD3L00CAS5556J99YH, WD3L00CALR3J99YH, 56188, 56188, PS56188, PS56188, 3110-00-278-7176, 00-278-7176, 3110002787176, 002787176
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | JAN 01, 1963 | 00-278-7176 | 00014 ( BEARING, BALL, ANNULAR ) |
REFERENCE DRAWINGS & PICTURES
NON-LOADING GROOVE, NON-SEPARABLE
Cross Reference | NSN 3110-00-278-7176
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 56188 | 72599 | ALLIEDSIGNAL INCDBA ALLIED-SIGNAL AEROSPACE CO |
| PS56188 | 72599 | ALLIEDSIGNAL INCDBA ALLIED-SIGNAL AEROSPACE CO |
| 56188 | 36069 | FAG AEROSPACE INCDIV FAG AEROSPACE |
| WD3L00CS5411J | 24617 | GENERAL MOTORS CORP |
| WD3L00CLR5411 | 24617 | GENERAL MOTORS CORP |
| WD3L00CAS5556J99YH | 24617 | GENERAL MOTORS CORP |
| WD3L00CALR5411 | 24617 | GENERAL MOTORS CORP |
| WD3L000A | 43334 | GENERAL MOTORS CORPDELCO MORAINE NDH DIV |
| WD3L00CS5411J | 43334 | GENERAL MOTORS CORPDELCO MORAINE NDH DIV |
| WD3L00CAS5556J99YH | 43334 | GENERAL MOTORS CORPDELCO MORAINE NDH DIV |
| WD3L00CALR3J99YH | 43334 | GENERAL MOTORS CORPDELCO MORAINE NDH DIV |
| 56188 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 56188 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| PS56188 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| PS56188 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3110-00-278-7176
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
| OVERALL WIDTH | 8.0 MILLIMETERS NOMINAL |
| BORE DIAMETER | 10.00 MILLIMETERS NOMINAL |
| OVERALL OUTSIDE DIAMETER | 26.00 MILLIMETERS NOMINAL |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| CALIBRATION DESIGNATOR | C00 |
| BORE SHAPE | STRAIGHT |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| LOAD DIRECTION | RADIAL |
| INTERNAL CLEARANCE | R0.0004 INCHES MINIMUM AND R0.0008 INCHES MAXIMUM |
| SPECIAL FEATURES | ID AND OD CORNER RADIUS0.0160 IN. BOTH SIDES,HEAT STABILIZED FOR HIGH TEMP OPERATION |