Part Details | SLEEVE BUSHING
3120-01-131-2333 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
Alternate Parts: 74A6612572003, 74A661257-2003, 10107928, 74A6612572003, 74A661257-2003, 3120-01-131-2333, 01-131-2333, 3120011312333, 011312333
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | MAY 06, 1982 | 01-131-2333 | 13206 ( BUSHING, SLEEVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3120-01-131-2333
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 74A661257-2003 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 10107928 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 74A661257-2003 | 7U218 | PENN CIGAR MACHINES, INC. |
Technical Data | NSN 3120-01-131-2333
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 0.3430 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 0.4969 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 0.3750 INCHES MINIMUM AND 0.3760 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 1.0000 INCHES NOMINAL |
| FLANGE WIDTH | 0.0870 INCHES MINIMUM AND 0.0920 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 76301-PS21202 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |