Part Details | SLEEVE BUSHING
3120-01-132-3484 A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
Alternate Parts: ST4M21907009, ST4M219-07009, ST4M21907009, ST4M219-07009, 3120-01-132-3484, 01-132-3484, 3120011323484, 011323484
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 31 | MAY 26, 1982 | 01-132-3484 | 13206 ( BUSHING, SLEEVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3120-01-132-3484
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| ST4M219-07009 | 70265 | ALL-POWER MANUFACTURING CO.INC. |
| ST4M219-07009 | 76301 | BOEING COMPANY, THEDBA BOEING |
Technical Data | NSN 3120-01-132-3484
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 0.1800 INCHES MINIMUM AND 0.1850 INCHES MAXIMUM |
| BODY OUTSIDE DIAMETER | 0.5730 INCHES MINIMUM AND 0.5735 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 0.4238 INCHES MINIMUM AND 0.4248 INCHES MAXIMUM |
| SPECIAL FEATURES | ID DRY FILM LUBRICATED,P.S. 18021,CLASS 1 W/ACETYL ALCOHOL OVERCOAT,P.S. 18015 FOR REAMING AT ASSEMBLY |
| TEST DATA DOCUMENT | 76301-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |