Part Details | METAL CUTTING BAND SAW
3405-00-294-9591 A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF.
Alternate Parts: 340522521512, 3405-2252-1512, MILS80201, MIL-S-80201, 3405-00-294-9591, 00-294-9591, 3405002949591, 002949591
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1963 | 00-294-9591 | 17908 ( SAW, BAND, METAL CUTTING ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3405-00-294-9591
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3405-2252-1512 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| MIL-S-80201 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3405-00-294-9591
| Characteristic | Specifications |
|---|---|
| DRIVE METHOD | ELECTRIC MOTOR |
| HORSEPOWER RATING | 1.500 |
| CURRENT TYPE | AC |
| VOLTAGE RATING | 208.000 VOLTS NOMINAL |
| FREQUENCY RATING | 60.000 HERTZ NOMINAL |
| PHASE | THREE |
| ELECTRIC MOTOR QUANTITY | 1 |
| MOUNTING TYPE | FLOOR |
| TABLE LENGTH | 24.000 INCHES NOMINAL |
| TABLE WIDTH | 24.000 INCHES NOMINAL |
| TABLE TYPE | TILTING |
| TABLE RIGHT TILT ANGLE IN DEG | 45.0 |
| TABLE LEFT TILT ANGLE IN DEG | 10.0 |
| BAND TYPE FOR WHICH DESIGNED | R$DCJH |
| FILE MAXIMUM WIDTH ACCOMMODATED | 0.500 INCHES |
| BLADE MAXIMUM WIDTH ACCOMMODATED | 0.750 INCHES |
| FRAME TYPE | RIGID |
| VISE | NOT PROVIDED |
| THROAT DEPTH | 15.250 INCHES NOMINAL |
| DISTANCE BETWEEN GUIDE AND TABLE | 12.000 INCHES NOMINAL |
| CUTTING SPEED RANGE | +50.0 TO +5200.0 FEET PER MINUTE |
| INFINITE CUTTING SPEED FEATURE | PROVIDED |
| POWER FEED FEATURE | PROVIDED |
| FEED METHOD | WORK INTO CUTTING BAND |
| BRAKING FACILITY | NOT INCLUDED |
| BUILT-IN COOLANT SYSTEM | NOT INCLUDED |
| INTEGRAL BUTT WELDER | INCLUDED |
| INTEGRAL GRINDER | INCLUDED |
| ACCESSORY COMPONENTS AND QUANTITY | ALUMINUM OXIDE ABRASIVE BAND,1 IN. W,12 EA,NO. 50,NO. 80,NO. 150; SAW BLADE GUIDE ADAPTER SET,90 DEG 1; DRIVE BELT SET 1; FLEXIBLE BACK CONVENTIONAL TOOTH SET,BAND SAW BLADE,RAKER SET,100 FT COILS PER GGG-B-421,TY 1,STYLE 1,8 COILS 0.025 IN. THK,W IN IN. AND TEETH AS FOLLOWS 1/8 14,1/8 18,1/8 24,1/4 10,1/4 18,1/4 24,1/2 6,1/2 10,2 COILS 0.032 IN. THK,3/4 10; SKIP TOOTH FLEXIBLE BACK BAND SAW BLADE,100 FT COILS PER GGG-B-421,TY 1,STYLE 2,2 COILS 0.025 IN. THK,W IN IN. AND TEETH AS FOLLOWS 1/4 6,1/2 4,1 COIL 0.032 IN. THK,3/4 3; 1 PUMP AND CHIP BLOWER,1 CIRCLE CUTTING ATTACHMENT; 1 CUT OFF-MITRE ATTACHMENT; MED CUT FLAT BASTARD FILE BANDS 1 EA 1/4 IN. W,1/2 IN. W; OVAL BASTARD FILE BAND MED CUT 1/4 IN. W BANDS 1 SET; FILE BAND GUIDES 1 SET EA FOR 1/4 IN. 1/2 IN. W BANDS; 1 SET ROLLER BACK-UP BEARING FOR 1/2,3/16,1/4,3/8,1/2,3/4 IN. W/BLADES; 1 HOLDING JAW; 1 SHIELDED TABLE LIGHT; 1 ETCHING PENCIL; 1 RIP FENCE |
| SPECIAL FEATURES | ACCESSORY COMPONENTS AND QTY,FILE BAND GUIDES 1/4 IN. W,1 SET,FILE BAND GUIDES 1/2 IN. W,1 SET; BACK-UP ROLLER BEARING FOR 1/8,3/16,1/4,3/8,1/2,AND 3/4 IN. W BLADES,1 SET; JAW HOLDING 1; SHIELDED TABLE LIGHT 1; ETCHING PENCIL 1; RIP FENCE 1 |
| NONDEFINITIVE SPEC/STD DATA | 16 SIZE |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY VOLTAGE RATING |