Part Details | METAL CUTTING BAND SAW
3405-00-528-8688 A vairable speed saw, basically designed to cut and/or file metal, using a band saw blade and/or a band file that is revolved or rotated around a driver and idler wheel(s). The teeth form a vertical line while passing through the work. It is equipped with a fixed or tilting horizontal table for mounting the work. The work table and/or saw frame may be capable of tilting as a unit to permit angle cutting. It may be provided with sufficient cutting speeds to allow for wood and/or other material cutting. Excludes SAW (3), BAND, CUTOFF.
Alternate Parts: ML, ML, 20122H, 2012-2H, 3405-00-528-8688, 00-528-8688, 3405005288688, 005288688
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1963 | 00-528-8688 | 17908 ( SAW, BAND, METAL CUTTING ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3405-00-528-8688
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| ML | 14320 | CONTINENTAL MACHINES INC |
| ML | 18056 | DOALL BALTIMORE COMPANY |
| 2012-2H | 18056 | DOALL BALTIMORE COMPANY |
Technical Data | NSN 3405-00-528-8688
| Characteristic | Specifications |
|---|---|
| DRIVE METHOD | ELECTRIC MOTOR |
| HORSEPOWER RATING | 3.000 |
| CURRENT TYPE | DC |
| VOLTAGE RATING | 200.0 VOLTS MINIMUM AND 575.0 VOLTS MAXIMUM |
| ELECTRIC MOTOR QUANTITY | 1 |
| ROTATIONAL SPEED RATING IN RPM | 5200.0 |
| MOUNTING TYPE | FLOOR |
| TABLE LENGTH | 33.500 INCHES NOMINAL |
| TABLE WIDTH | 26.500 INCHES NOMINAL |
| TABLE TYPE | TILTING |
| TABLE RIGHT TILT ANGLE IN DEG | 45.0 |
| TABLE LEFT TILT ANGLE IN DEG | 10.0 |
| BAND TYPE FOR WHICH DESIGNED | SAW BLADE |
| BLADE MAXIMUM LENGTH ACCOMMODATED | 154.000 INCHES |
| BLADE MAXIMUM WIDTH ACCOMMODATED | 1.000 INCHES |
| FRAME TYPE | RIGID |
| VISE | NOT PROVIDED |
| THROAT DEPTH | 20.000 INCHES NOMINAL |
| DISTANCE BETWEEN GUIDE AND TABLE | 12.000 INCHES NOMINAL |
| CUTTING SPEED RANGE | +5.0 TO +5200.0 FEET PER MINUTE |
| CUTTING SPEED QUANTITY | 2 |
| POWER FEED FEATURE | PROVIDED |
| FEED METHOD | CUTTING BAND INTO WORK |
| BRAKING FACILITY | INCLUDED |
| BRAKING DEVICE TYPE | NONAUTOMATIC |
| BUILT-IN COOLANT SYSTEM | INCLUDED |
| INTEGRAL BUTT WELDER | INCLUDED |
| INTEGRAL GRINDER | INCLUDED |
| ACCESSORY COMPONENTS AND QUANTITY | SET OF SAW GUIDE BLOCKS W/CARBIDE BACKUP AND SAW GUIDE INSERTS,1;AIR COMPRESSOR,1;CHIP DRAWER,1;WORKLIGHT,1 |
| SPECIAL FEATURES | AVAILABLE VOLT RATING 200/208/230/460/575;BLADE ACCOM 1/16 TO 1 IN.;TWO CUTTING SPEED RANGES-LOW 5 TO 300 FPM HIGH 850 TO 5200 FPM;FEED METHOD CAN BE CUTTING BAND INTO WORK AND WORK INTO CUTTING BAND |