Part Details | ENGINE LATHE
3416-00-174-9171
Alternate Parts: 341612051033, 3416-1205-1033, 00L125, 3416-00-174-9171, 00-174-9171, 3416001749171, 001749171
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1963 | 00-174-9171 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-174-9171
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3416-1205-1033 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| 00L125 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 3416-00-174-9171
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | BENCH |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.0 TO +80.0 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| BED TYPE | SOLID |
| RATED SWING | 10.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| SWING OVER CROSS SLIDE | 5.750 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 33.750 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 ASA STANDARD |
| HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 12 |
| SPINDLE SPEED RANGE IN RPM | P55.0/P1400.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 0.75 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | B220.0$$B440.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | THREE |
| ACCESSORY COMPONENTS AND QUANTITY | 2 BELT,FLAT,V-DR.;1 BENCH-LATHE;1BIT,LATHE TOOL HOLDER,HIGH SPEED STEEL,BORING,3/16BY3/16IN.TURNING 1/4BY1/4IN.;2 BLADE LATHE TOOL HOLDER,CUT OFF,HIGH SPEED STEEL,3/32BY5/8 IN.;2 CTR.,LATHE,PIPE,1/2BY 3 IN.;2 CTR.,LATHE,60 DEG.NO.2 MORSE TAPER;2 CHUCK,DRILL,3 JAW,0 TO 1/2 IN.;2 CHUCK,LATHE,FITTED,IND.,4 JAW,REV.,8 IN.,UNIV.,3 JAW,W/2 SETS JAWS,1 SET INTERNAL,1 SET EXT.,6 IN.;2 COLLET,SPLIT,F/ROUND WORK,1/16,1/8,3/16,1/4,5/16,3/8,7/16,1/2,9/16,5/8,11/16,3/4,7/8,1 IN.;2 COLLET ATTACHMENT,H/WHEEL TYPE,1/16 TO 1 IN.;2 CUTTING ATTACHMENT,MILLING AND KEYWAY;2 LATHE,BENT TAIL,SINGLE SCREW,SINGLE,3/8,3/4,1-1/4,1-1/2,2-1/2 IN.;2 FACE PLATE,5-5/8,8-3/8 IN.;2 SET GEARS,METRIC TRANSPOSING,ENG.GRAD.;2 HOLDER,LATHE TOOL,TURNING,STRAIGHT,3/8 BY 7/8 IN.SHANK FOR 1/4 BY 1/4 IN.BIT,BORING,3/8 BY 7/8 IN.SHANK,COMP.W/9/16 IN.BAR AND 30,45,90 DEG.END CAPS FOR 3/16 IN.BITS,CUTTING OFF,RH,3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE |
| SPECIAL FEATURES | 2 HOLDER,LATHE TOOL,CUTTING OFF,STRAIGHT 3/8 BY 7/8 IN.SHANK,F/3/32 BY 5/8 IN.BLADE,TURNING,OFFSET,LH,3/8 BY 7/8 IN.SHANK,F/1/4 BY 1/4 IN.BIT;2 INDIC.,THREAD DIAL;2 KNURLING TOOL,REVOLVING HEAD,3/8 BY 7/8 BY 5-1/2 IN.SHANK,W/3 PR KNURLS DIAMOND SHAPE,FINE,MED.,COARSE 2 POST,TOOL,TO ACCOMMODATE 3/8 BY 7/8 IN.SHANK;2 REST,CPD.GRAD.,FOLLOWER,STEADY;2 SLEEVE,LATHE,H/STOCK SPINDLE;2 STOP,CARRIAGE,MICROMETER,THREAD CUTTING,ADJUSTABLE;2 SWITCH,208V,3 POS.START,STOP,REV.;2 TAPER ATTACHMENT,TELESCOPIC,LATHE |