Part Details | ENGINE LATHE
3416-00-252-7094
Alternate Parts: 341621116054, 3416-2111-6054, MILL23249TYIISZ1610, MIL-L-23249TYIISZ1610, MILL23249 SZ1610, MIL-L-23249 SZ1610, 3416-00-252-7094, 00-252-7094, 3416002527094, 002527094
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1963 | 00-252-7094 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-252-7094
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3416-2111-6054 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| MIL-L-23249TYIISZ1610 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-L-23249 SZ1610 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3416-00-252-7094
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | FLOOR |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 30 |
| THREAD QUANTITY RANGE | +4.0 TO +80.0 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| BED TYPE | SOLID |
| RATED SWING | 16.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 16.000 INCHES NOMINAL |
| SWING OVER CROSS SLIDE | 10.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 54.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | GEARED HEAD |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 4 ASA STANDARD |
| HOLE DIAMETER THROUGH SPINDLE | 1.406 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 16 |
| SPINDLE SPEED RANGE IN RPM | P28.0/P1000.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | B220.0$$B440.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | THREE |
| ACCESSORY COMPONENTS AND QUANTITY | 1 EA,BAR,BORING,3/16,1/4,3/8 IN.;4 BELT;12 EA,BIT,BORING,3/16,5/16 IN.;24 EA,BIT BORING,3/8 IN.;10 BLADES,TOOL HOLDER,1/8BY7/8 IN.;1 CENTER LINE,NO.4 ASA TAPER;2 CENTER HEAD,NO.4 ASA TAPER;2 CENTER,TAIL,NO.4 TAPER;1 CHUCK,3 JAW,10 IN.;1 CHUCK,4 JAW,12 IN.;1 EA,DOG,BENT,3/8,1/2,3/4,1,1-1/2 IN.;1 FACEPLATE,LG.,13 IN.;1 FACEPLATE,DOG TAPER NOSE;1 GEAR SET,TRANSING,METRIC,GRAD.;1 EA,HOLDER,LATHE TOOL,BORING HOLDER,CUTOFF OFFSET,LH,RH,STRAIGHT;1 EA,HOLDER,TURNING OFFSET,LH 5/8BY1-3/8,RH,3/8BY5/8 IN.;1 HOLDER,TURNING STRAIGHT 5/8BY1-3/8 IN.;1 PR EA,INDIC.,THD DIAL,LATHE KNURLS,COARSE,MED.,FINE;1 KNURLING TOOL;1 POST TOOL;1 REST,CPD.GRAD.;1 EA,REST,FOLLOWER,STEADY;1 SLEEVE;1 STOP,CARRIAGE,MICROMETER;1 SWITHC;1 ATTACHMENT,TELESCOPIC;1 THD TOOL |
| NONDEFINITIVE SPEC/STD DATA | 16 SIZE |
| DEPARTURE FROM CITED DESIGNATOR | ASHK |