Part Details | ENGINE LATHE
3416-00-517-0955
Alternate Parts: 7541300, 341621110020, 3416-2111-0020, 00L125, 3416-00-517-0955, 00-517-0955, 3416005170955, 005170955
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1963 | 00-517-0955 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-517-0955
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7541300 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
| 3416-2111-0020 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| 00L125 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
Technical Data | NSN 3416-00-517-0955
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | BENCH |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.0 TO +80.0 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| BED TYPE | SOLID |
| RATED SWING | 10.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 10.000 INCHES NOMINAL |
| SWING OVER CROSS SLIDE | 5.750 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 20.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 ASA STANDARD |
| HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 12 |
| SPINDLE SPEED RANGE IN RPM | P55.0/P1400.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE FEED CHANGE QUANTITY | 48 |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 0.75 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | 110.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | SINGLE |
| ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
| NONDEFINITIVE SPEC/STD DATA | II TYPE AND 2 CLASS |
| DEPARTURE FROM CITED DOCUMENT | ELEC,FAAZ,AKYD |