Part Details | ENGINE LATHE
3416-00-517-1051
Alternate Parts: 00L127, MILL23400, 3416-00-517-1051, 00-517-1051, 3416005171051, 005171051
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1963 | 00-517-1051 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-517-1051
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 00L127 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| MILL23400 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3416-00-517-1051
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | FLOOR |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.0 TO +80.0 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| BED TYPE | SOLID |
| RATED SWING | 14.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 14.000 INCHES NOMINAL |
| SWING OVER CROSS SLIDE | 9.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 30.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | GEARED HEAD |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 3 ASA STANDARD |
| HOLE DIAMETER THROUGH SPINDLE | 1.406 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 16 |
| SPINDLE SPEED RANGE IN RPM | P28.0/P1000.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE FEED CHANGE QUANTITY | 48 |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 5.0 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | B220.0$$B440.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | THREE |
| ACCESSORY COMPONENTS AND QUANTITY | 1 BELT SET,COMPLETE; 1 CENTER,HALF; 1 CENTER,HEADSTOCK; 1 CENTER,TAILSTOCK; CHUCK,DRILL,1/2 IN. CAPACITY; 1 CHUCK,SPINDLE NOSE,LATHE; 1 CHUCK,3 JAW,UNIVERSAL,6 IN.; 1 CHUCK,4 JAW,INDEPENDENT 8 IN.; 1 COLLECT SET,1/16 IN. TO 1-3/8 IN. RANGE,11 COLLECTS; 1 COOLANT SYSTEM,MOTOR DRIVEN; 1 DOG SET,BENT,1 IN.,2 IN.,3 IN.,4 IN. SIZES; 1 HOLDER,TOOL,KNURLING ARMSTRONG NO. 1K; 1 HOLDER,TOOL,BORING ARMSTRONG NO. 9; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-L; 1 HOLDER,TOOL,CUT-OFF ARMSTRONG NO. 31-R; 1 HOLDER,TOOL,TURNING ARMSTRONG NO. 1R; 1HOLDER,TOOL,TURNING ARMSTRONG NO. 1-L; 1 MANDREL SET,LATHE; 1 MOTOR,5 HP,220/440V,60 CYCLES,3 PHASE,1800 RPM; 1 REST,FOLLOW; 1 STARTER,NON-REVERSING,MAGNETIC; 1 SWITCH,PUSH,REMOE CONTROL; 1 TAPER ATTACHMENT,TELESCOPIC |
| NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 14 SIZE |