Part Details | ENGINE LATHE
3416-00-782-1443
Alternate Parts: 341621116030, 3416-2111-6030, MILL23257, 3416-00-782-1443, 00-782-1443, 3416007821443, 007821443
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | JAN 01, 1960 | 00-782-1443 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-00-782-1443
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3416-2111-6030 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| MILL23257 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 3416-00-782-1443
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | FLOOR |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 66 |
| THREAD QUANTITY RANGE | +1.0 TO +224.0 PER INCH |
| PERFORMANCE TYPE | HEAVY DUTY |
| PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| BED TYPE | SOLID |
| RATED SWING | 16.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 16.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM |
| SWING OVER CROSS SLIDE | 10.000 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 30.000 INCHES NOMINAL |
| HEADSTOCK DRIVE TYPE | GEARED HEAD |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 4 MORSE |
| HOLE DIAMETER THROUGH SPINDLE | 1.750 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 24 |
| SPINDLE SPEED RANGE IN RPM | P23.0/P1500.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE FEED CHANGE QUANTITY | 66 |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 15.000 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | B220.0$$B440.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | THREE |
| ACCESSORY COMPONENTS AND QUANTITY | PER MIL-STD 931 |
| NONDEFINITIVE SPEC/STD DATA | II TYPE AND 1610 SIZE |
| DEPARTURE FROM CITED DOCUMENT | BTYP,ELEC,AKYD |