Part Details | ENGINE LATHE
3416-01-030-8195
Alternate Parts: 341621113034, 3416-2111-3034, 1334MIL, 1334-MIL, 1334MIL, 1334-MIL, 3416-01-030-8195, 01-030-8195, 3416010308195, 010308195
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 34 | NOV 12, 1976 | 01-030-8195 | 03137 ( LATHE, ENGINE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3416-01-030-8195
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3416-2111-3034 | 99998 | DEFENSE SUPPLY CENTER RICHMONDINDUSTRIAL PLANT EQUIPMENT /DLA/ |
| 1334-MIL | 0B6Z5 | OMATECH SERVICE LTD |
| 1334-MIL | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 3416-01-030-8195
| Characteristic | Specifications |
|---|---|
| MOUNTING TYPE | FLOOR |
| DESIGN TYPE | SCREW |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.0 TO +80.0 PER INCH |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| BED TYPE | SOLID |
| RATED SWING | 13.000 INCHES NOMINAL |
| ACTUAL SWING OVER BED | 13.000 INCHES NOMINAL |
| SWING OVER CROSS SLIDE | 7.750 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE | 30.000 INCHES MINIMUM |
| HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 3 MORSE |
| HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 12 |
| SPINDLE SPEED RANGE IN RPM | P53.0/P1800.0 |
| CARRIAGE QUANTITY | 1 |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE FEED CHANGE QUANTITY | 48 |
| GEAR CHANGE TYPE | QUICK |
| ELECTRIC MOTOR QUANTITY | 1 |
| ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| CURRENT TYPE | AC |
| VOLTAGE IN VOLTS | B115.0$$B230.0 |
| FREQUENCY IN HERTZ | 60.0 |
| PHASE | SINGLE |
| ACCESSORY COMPONENTS AND QUANTITY | 2 NO.3 MORSE TAPER LATHE CENTERS,3 CHUCKS,1 FLEXIBLE RUBBER COLLET SET,5 BENT TAIL DOG LATHES,1 DOG LATHE,1 DRIVE PLATE,1 FACEPLATE,1 METRIC TRANSPOSING GEAR LATHE,1 BORING BAR CUTTING TOOL HOLDER,3 CUTTING-OFF CUTTING TOOL HOLDERS,3 TURNING CUTTING TOOL HOLDERS,1 V-FORM THREADING TOOL HOLDER,1 KNURLING TOOLS,4 COLLET PLUGS,2 LATHE RESTS,1 LATHE CENTER SLEEVE,1 MICROMETER LATHE CARRIAGE STOP,1 TELESCOPIC LATHE TAPEP ATTACHMENT |
| SPECIAL FEATURES | 1400 LBS.MAX NET WT OF LATHE; FLOOR CABINET DESIGNED FOR STOWAGE OF ALL ACCESSORIES |