Part Details | FLUID FILTER ELEMENT
4330-00-066-4561 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
Alternate Parts: 8009032, 80090-32, 304R491H01, 304R491H01, 4330-00-066-4561, 00-066-4561, 4330000664561, 000664561
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 43 | JAN 01, 1963 | 00-066-4561 | 32624 ( FILTER ELEMENT, FLUID ) |
REFERENCE DRAWINGS & PICTURES
CYLINDRICAL W/OUT CONTAINER
Cross Reference | NSN 4330-00-066-4561
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 80090-32 | 15472 | 3M PURIFICATION INC. |
| 304R491H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN SYSTEMS |
| 304R491H01 | 79500 | WESTINGHOUSE ELECTRIC CORP |
Technical Data | NSN 4330-00-066-4561
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| BODY DIAMETER | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| BODY INSIDE DIAMETER | 0.118 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| BODY OVERALL LENGTH | 0.130 INCHES NOMINAL |
| DESIGN TYPE | REUSABLE |
| FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL |
| FLOW DIRECTION | OUTSIDE IN |
| MEDIA FOR WHICH DESIGNED | Y ANY ACCEPTABLE |
| DROP PRESSURE | 20.0 POUNDS PER SQUARE INCH |
| TEST DATA DOCUMENT | 79500-304R491H01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| FSC APPLICATION DATA | GUIDED MISSILE CONTROL |