Part Details | FLUID FILTER ELEMENT
4330-01-242-3032 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
Alternate Parts: ACB612F1Y1, 4330-01-242-3032, 01-242-3032, 4330012423032, 012423032
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 43 | OCT 09, 1986 | 01-242-3032 | 32624 ( FILTER ELEMENT, FLUID ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 4330-01-242-3032
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| ACB612F1Y1 | 18350 | PALL AEROPOWER CORPORATION |
Technical Data | NSN 4330-01-242-3032
| Characteristic | Specifications |
|---|---|
| BODY DIAMETER | 0.770 INCHES MINIMUM AND 0.775 INCHES MAXIMUM |
| BODY OVERALL LENGTH | 3.730 INCHES MINIMUM AND 3.780 INCHES MAXIMUM |
| DESIGN TYPE | NONREUSABLE |
| FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE |
| FLOW DIRECTION | INSIDE OUT |
| MEDIA FOR WHICH DESIGNED | Y ANY ACCEPTABLE |
| TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
| DROP PRESSURE | 18.8 POUNDS PER SQUARE INCH |
| DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | SOLID ONE END WITH HOLE FOR LOCKWIRE |