Part Details | FLUID FILTER ELEMENT
4330-01-474-5560 A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
Alternate Parts: 0090MA010P, 4330-01-474-5560, 01-474-5560, 4330014745560, 014745560
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 43 | MAY 05, 2000 | 01-474-5560 | 32624 ( FILTER ELEMENT, FLUID ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR (INCL SQUARE)
Cross Reference | NSN 4330-01-474-5560
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0090MA010P | 1FLG9 | HYDAC TECHNOLOGY CORPORATIONDBA HYDRAULIC DIVISION |
Technical Data | NSN 4330-01-474-5560
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | 4 RECTANGULAR (INCL SQUARE) |
| BODY DIAMETER | 3.660 INCHES NOMINAL |
| BODY OVERALL LENGTH | 5.900 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UN |
| NOMINAL THREAD SIZE | 1.500 INCHES |
| DESIGN TYPE | REUSABLE |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| FLOW DIRECTION | INSIDE OUT |
| MEDIA FOR WHICH DESIGNED | Y ANY ACCEPTABLE |
| TEMP RATING | -4.0 DEG FAHRENHEIT MINIMUM AND 212.0 DEG FAHRENHEIT MAXIMUM |
| SPECIAL FEATURES | REPLACEABLE SPIN ON FILTER ELEMENT; STANDARD LENGTH ELEMENT SZ 90; FLOW RATING 15 GPM; NECESSARY CLEARANCE FOR ELEMENT REMOVAL 1.50 IN |
| END ITEM IDENTIFICATION | MFP90 FLUID FILTER |