Part Details | SOLENOID VALVE
4810-00-493-1844 A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
Alternate Parts: 13216E6158, TIP0154223JUL71, TIP01542-23JUL71, B71283A74797, B-71283A74797, ORS323, B71283A74797, B-71283A74797, 4810-00-493-1844, 00-493-1844, 4810004931844, 004931844
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 48 | FEB 13, 1970 | 00-493-1844 | 10998 ( VALVE, SOLENOID ) |
REFERENCE DRAWINGS & PICTURES
STRAIGHT THRU
Cross Reference | NSN 4810-00-493-1844
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13216E6158 | 97403 | CECOM LR CENTER |
| TIP01542-23JUL71 | 97403 | CECOM LR CENTER |
| B-71283A74797 | 93781 | PARKER-HANNIFIN CORPORATIONDBA FLUID CONTROL DIVISION |
| ORS323 | 93781 | PARKER-HANNIFIN CORPORATIONDBA FLUID CONTROL DIVISION |
| B-71283A74797 | 81978 | PARKER-HANNIFIN CORPORATIONDBA FLUID CONTROLS DIVISION |
Technical Data | NSN 4810-00-493-1844
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | STRAIGHT THRU |
| FLOW CONTROL DEVICE | DIAPHRAGM |
| VALVE OPERATION METHOD | SOLENOID |
| POWER DRIVE OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH NOMINAL |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 24.0 DC |
| CURRENT RATING IN AMPS | 0.510 |
| FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN |
| APERTURE DIAMETER | 0.250 INCHES NOMINAL |
| MOUNTING POSITION | HORIZONTAL |
| TEST DATA DOCUMENT | 97403-13216E6158 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |