Part Details | CLOSE TOLERANCE SCREW
5305-00-486-2578 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Alternate Parts: VT1039H1013, VT1039H10-13, HR101H1013, HR101H10-13, HR101H1013, HR101H10-13, C387H1013, C387H10-13, 64040H1013, 64040H10-13, 64040H1013, 64040H10-13, AIC1023H1013, AIC1023H10-13, CS318642H1013, CS318642H10-13, 5305-00-486-2578, 00-486-2578, 5305004862578, 004862578
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 06, 1969 | 00-486-2578 | 29294 ( SCREW, CLOSE TOLERANCE ) |
REFERENCE DRAWINGS & PICTURES
HEXAGON COUNTERSUNK
OFFSET CRUCIFORM (TORQUE SET)
Cross Reference | NSN 5305-00-486-2578
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| VT1039H10-13 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| HR101H10-13 | 73197 | HI-SHEAR CORPORATION |
| HR101H10-13 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| C387H10-13 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| 64040H10-13 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| 64040H10-13 | 80539 | SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP |
| AIC1023H10-13 | 06725 | SPS TECHNOLOGIES, LLCDBA AIR INDUSTRIES |
| CS318642H10-13 | 93907 | TEXTRON FASTENING SYSTEMSDBA DECORAH OPERATIONS TFS |
Technical Data | NSN 5305-00-486-2578
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.625 INCHES |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.843 INCHES MINIMUM AND 0.893 INCHES MAXIMUM |
| FASTENER LENGTH | 1.665 INCHES MINIMUM AND 1.695 INCHES MAXIMUM |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| HEAD STYLE | 0 HEXAGON COUNTERSUNK |
| HEAD DIAMETER | 1.007 INCHES MINIMUM AND 1.034 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 60.0 DEGREES NOMINAL |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| GRIP LENGTH | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM |
| GRIP DIAMETER | 0.6235 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM |
| SPECIAL FEATURES | BEARING SURFACE OF HEAD GROOVED TO 0.769 IN. MIN,0.771 IN. MAX DIA,0.155 IN. MIN,0.160 IN. MAX FROM TOP OF HEAD |