Part Details | PANEL SCREW ASSEMBLY
5305-01-264-5899 A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
Alternate Parts: FT1066F10B2.5, FT1066F-10-B-2.5, FT106610B2.5, FT1066-10B2.5, DPY7900P10B2.5, DPY7900P-10-B-2.5, DPY7900P10B2.5, DPY7900P-10-B-2.5, C962310B2.5, C9623-10B2.5, 5305-01-264-5899, 01-264-5899, 5305012645899, 012645899
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | OCT 05, 1987 | 01-264-5899 | 33044 ( SCREW ASSEMBLY, PANEL ) |
REFERENCE DRAWINGS & PICTURES
HEXAGON COUNTERSUNK
CROSS RECESS TYPE 1
Cross Reference | NSN 5305-01-264-5899
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FT1066F-10-B-2.5 | 58794 | FASTENER TECHNOLOGY CORP. |
| FT1066-10B2.5 | 58794 | FASTENER TECHNOLOGY CORP. |
| DPY7900P-10-B-2.5 | 0HDW7 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| DPY7900P-10-B-2.5 | 97928 | HUCK INTL INC |
| C9623-10B2.5 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 5305-01-264-5899
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.250 INCHES NOMINAL |
| FASTENER LENGTH | 0.462 INCHES MINIMUM AND 0.482 INCHES MAXIMUM |
| HEAD STYLE | 0 HEXAGON COUNTERSUNK |
| HEAD DIAMETER | 0.375 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| MATERIAL ACCOMMODATED THICKNESS | 0.090 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |