Part Details | PANEL SCREW ASSEMBLY
5305-01-272-9979 A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
Alternate Parts: CA300562382, CA30056-2-3-8-2, FT11030833, FT1103-08-3-3, FKHRW79008C3, FKHRW7900-8-C-3, FKHRW79008C3, FKHRW7900-8-C-3, 114424332, 11442433-2, 5305-01-272-9979, 01-272-9979, 5305012729979, 012729979
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 18, 1988 | 01-272-9979 | 33044 ( SCREW ASSEMBLY, PANEL ) |
REFERENCE DRAWINGS & PICTURES
HEXAGON
CROSS RECESS TYPE 1
Cross Reference | NSN 5305-01-272-9979
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CA30056-2-3-8-2 | 29372 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| FT1103-08-3-3 | 58794 | FASTENER TECHNOLOGY CORP. |
| FKHRW7900-8-C-3 | 0HDW7 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| FKHRW7900-8-C-3 | 97928 | HUCK INTL INC |
| 11442433-2 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 5305-01-272-9979
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNJC |
| NOMINAL THREAD DIAMETER | 0.164 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.210 INCHES NOMINAL |
| FASTENER LENGTH | 1.035 INCHES MINIMUM AND 1.100 INCHES MAXIMUM |
| MINIMUM TENSILE STRENGTH | 190000 POUNDS PER SQUARE INCH |
| HEAD STYLE | HEXAGON |
| HEAD HEIGHT | 0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.250 INCHES NOMINAL |
| INTERNAL DRIVE STYLE | 4 CROSS RECESS TYPE 1 |
| MATERIAL ACCOMMODATED THICKNESS | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |