Part Details | EXTERNALLY RELIEVED BODY SCREW
5305-01-281-5613 An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
Alternate Parts: 5003581, 5003581, 5305-01-281-5613, 01-281-5613, 5305012815613, 012815613
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUN 26, 1988 | 01-281-5613 | 01852 ( SCREW, EXTERNALLY RELIEVED BODY ) |
REFERENCE DRAWINGS & PICTURES
DISHED HEXAGON
CROSS RECESS TYPE 1
Cross Reference | NSN 5305-01-281-5613
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5003581 | 6S685 | BELL AND HOWELL COBEG/MIG MICRO IMAGERY GROUP |
| 5003581 | 54490 | DEPT OF THE ARMYU S ARMY ELECTRONICS COMMAND |
Technical Data | NSN 5305-01-281-5613
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| THREAD QUANTITY PER INCH | 40 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.160 INCHES NOMINAL |
| FASTENER LENGTH | 0.350 INCHES NOMINAL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| HEAD STYLE | 3 DISHED HEXAGON |
| HEAD DIAMETER | 0.212 INCHES NOMINAL |
| HEAD HEIGHT | 0.063 INCHES NOMINAL |
| INTERNAL DRIVE STYLE | 4 CROSS RECESS TYPE 1 |
| EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| FIRST DIAMETER FROM HEAD | 0.080 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.190 INCHES NOMINAL |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 9S STYLE |