Part Details | PANEL SCREW ASSEMBLY
5305-01-353-6900 A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
Alternate Parts: 3D016344, 3D0163-4-4, CA2129244TS, CA21292-4-4TS, 3D016344, 3D0163-4-4, 3D016344, 3D0163-4-4, FIT780344, FIT7803-4-4, 5305-01-353-6900, 01-353-6900, 5305013536900, 013536900
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | FEB 14, 1992 | 01-353-6900 | 33044 ( SCREW ASSEMBLY, PANEL ) |
REFERENCE DRAWINGS & PICTURES
HEXAGON COUNTERSUNK
OFFSET CRUCIFORM (TORQUE SET)
Cross Reference | NSN 5305-01-353-6900
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3D0163-4-4 | 29372 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| CA21292-4-4TS | 29372 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| 3D0163-4-4 | 88277 | BOEING COMPANY, THEDBA BOEING |
| 3D0163-4-4 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC.DBA F I T |
| FIT7803-4-4 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC.DBA F I T |
Technical Data | NSN 5305-01-353-6900
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 28 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.682 INCHES MINIMUM AND 0.821 INCHES MAXIMUM |
| FASTENER LENGTH | 1.112 INCHES NOMINAL |
| HEAD STYLE | 0 HEXAGON COUNTERSUNK |
| HEAD DIAMETER | 0.360 INCHES MINIMUM AND 0.404 INCHES MAXIMUM |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MATERIAL ACCOMMODATED THICKNESS | 0.291 INCHES MINIMUM AND 0.430 INCHES MAXIMUM |