Part Details | EXTERNALLY RELIEVED BODY SCREW
5305-01-396-9148 An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
Alternate Parts: 512181110, 51218-1-110, 5305-01-396-9148, 01-396-9148, 5305013969148, 013969148
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 28, 1994 | 01-396-9148 | 01852 ( SCREW, EXTERNALLY RELIEVED BODY ) |
REFERENCE DRAWINGS & PICTURES
HEXAGON
FLAT
HEXAGON FLATS
Cross Reference | NSN 5305-01-396-9148
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 51218-1-110 | 98425 | ERIE ENGINEERED PRODUCTS, INC. |
Technical Data | NSN 5305-01-396-9148
| Characteristic | Specifications |
|---|---|
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| THREAD QUANTITY PER INCH | 13 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 2.125 INCHES NOMINAL |
| FASTENER LENGTH | 2.250 INCHES NOMINAL |
| HEAD STYLE | HEXAGON |
| HOLE CONFIGURATION STYLE | HEXAGON FLATS |
| HOLE TYPE | DRILLED |
| HOLE QUANTITY | 1 |
| HOLE DIAMETER | 0.107 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| POINT STYLE | FLAT |
| POINT LENGTH | 0.120 INCHES NOMINAL |
| POINT CHAMFER ANGLE | 55.0 DEGREES MINIMUM AND 65.0 DEGREES MAXIMUM |
| EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| SECOND DIAMETER FROM HEAD | 0.405 INCHES MINIMUM AND 0.420 INCHES MAXIMUM |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.750 INCHES NOMINAL |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.150 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |