Part Details | EXTERNALLY RELIEVED BODY BOLT
5306-00-514-9108 An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.
Alternate Parts: 28014, 28014, 200439, 5306-00-514-9108, 00-514-9108, 5306005149108, 005149108
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-514-9108 | 06675 ( BOLT, EXTERNALLY RELIEVED BODY ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5306-00-514-9108
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 28014 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INCDIV SENSORS & CONTROLS |
| 28014 | 15555 | CURTISS-WRIGHT CORP |
| 200439 | 02978 | L3 TECHNOLOGIES, INC.DBA COMBAT PROPULSION SYSTEMS |
Technical Data | NSN 5306-00-514-9108
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.312 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.594 INCHES MAXIMUM |
| FASTENER LENGTH | 0.984 INCHES NOMINAL |
| BOTTOM COUNTERSINK DIAMETER | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| HEAD HEIGHT | 0.188 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.312 INCHES NOMINAL |
| COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL |
| EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| FIRST DIAMETER FROM HEAD | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.390 INCHES NOMINAL |
| SPECIAL FEATURES | THD PITCH DIA MUST BE CONCENTRIC,SQUARE AND TRUE TO BODY WITHIN 0.006 AND TO TAPER WITHIN 0.004 FULL INDICATOR READINGS WHEN MTD ON CENTERS OR EQUIVALENT |