Part Details | SHOULDERED STUD
5307-01-217-9168 A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN.
Alternate Parts: HL162PB621, HL162PB-6-2-1, 3M930321, 3M930-3-2-1, HL162PB621, HL162PB-6-2-1, HL162PB621, HL162PB-6-2-1, HL162PB621, HL162PB-6-2-1, HL162PB621, HL162PB-6-2-1, 10116462, HL162PB621, HL162PB-6-2-1, HL162PB621, HL162PB-6-2-1, 5307-01-217-9168, 01-217-9168, 5307012179168, 012179168
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | OCT 05, 1985 | 01-217-9168 | 15946 ( STUD, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SHOULDERED
Cross Reference | NSN 5307-01-217-9168
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HL162PB-6-2-1 | 92215 | ARCONIC GLOBAL FASTENERS & RINGS,INC. |
| 3M930-3-2-1 | 76301 | BOEING COMPANY, THEDBA BOEING |
| HL162PB-6-2-1 | 73197 | HI-SHEAR CORPORATION |
| HL162PB-6-2-1 | 17446 | HUCK INTERNATIONAL, INC.DBA ARCONIC FASTENING SYSTEMS AND |
| HL162PB-6-2-1 | 97928 | HUCK INTL INC |
| HL162PB-6-2-1 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| 10116462 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| HL162PB-6-2-1 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
| HL162PB-6-2-1 | 80539 | SPS TECHNOLOGIES, LLCDBA AEROSPACE FASTENERS GROUP |
Technical Data | NSN 5307-01-217-9168
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| STYLE DESIGNATOR | SHOULDERED |
| SHOULDER DIAMETER | 0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| NUT END SHANK LENGTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| STUD END SHANK LENGTH | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| STUD END SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| NUT END SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| OVERALL LENGTH | 0.876 INCHES MINIMUM AND 0.936 INCHES MAXIMUM |
| SPECIAL FEATURES | HEX POINT DRIVE IN NUT END,0.0791 TO 0.0806 IN. DISTANCE ACROSS FLATS,0.115 TO 0.135 IN. DP |
| SPECIFICATION/STANDARD DATA | 76301-3930 MANUFACTURERS STANDARD |