Part Details | SHOULDERED STUD
5307-01-248-2230 A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. All or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). It may be thread relieved. See also STUD, LOCKED IN.
Alternate Parts: HL162P8641, HL162P8-6-4-1, HL162PB641, HL162PB-6-4-1, HL162P8641, HL162P8-6-4-1, HL162PB641, HL162PB-6-4-1, 5307-01-248-2230, 01-248-2230, 5307012482230, 012482230
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 20, 1987 | 01-248-2230 | 15946 ( STUD, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SHOULDERED
Cross Reference | NSN 5307-01-248-2230
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| HL162P8-6-4-1 | 73197 | HI-SHEAR CORPORATION |
| HL162PB-6-4-1 | 73197 | HI-SHEAR CORPORATION |
| HL162P8-6-4-1 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
| HL162PB-6-4-1 | L4528 | LISI AEROSPACE CANADA CORPDIV HI SHEAR HOLDINGS INC |
Technical Data | NSN 5307-01-248-2230
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 301 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | SHOULDERED |
| SHOULDER DIAMETER | 0.357 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.064 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| NUT END SHANK LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| STUD END SHANK LENGTH | 0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
| STUD END SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| NUT END SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| OVERALL LENGTH | 0.977 INCHES NOMINAL |
| SPECIAL FEATURES | HEX POINT DRIVE IN NUT END 0.104 IN. MIN 0.119 IN. MAX DIA |
| SPECIFICATION/STANDARD DATA | 73197-HL162PB-6-4-1 MANUFACTURERS STANDARD |