Part Details | PLAIN STUD
5307-01-504-2386 A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
Alternate Parts: 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 3491AS0723, 3491AS07231, 3491AS0723-1, 3491AS07231, 3491AS0723-1, 5307-01-504-2386, 01-504-2386, 5307015042386, 015042386
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 23, 2003 | 01-504-2386 | 15948 ( STUD, PLAIN ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5307-01-504-2386
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3491AS0723-1 | 6W889 | AMMCON CORP. |
| 3491AS0723-1 | 0JC12 | B E C SYSTEMS, INC.DBA BEC MACHINE PRODUCTS |
| 3491AS0723-1 | 0A396 | COMPUTA-BASE-MACHINING, INC. |
| 3491AS0723-1 | 1V517 | DUHADAWAY TOOL AND DIE SHOP, INC. |
| 3491AS0723-1 | 56946 | G. S. PRECISION, INC. |
| 3491AS0723-1 | 17661 | HAMILL MANUFACTURING COMPANY |
| 3491AS0723-1 | 30828 | KROBACH MFG. CORP. |
| 3491AS0723-1 | 9U245 | MASTER RESEARCH & MANUFACTURING,INC. |
| 3491AS0723-1 | 2M490 | NASSAU TOOL WORKS, INC. |
| 3491AS0723-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
| 3491AS0723 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
| 3491AS0723-1 | 3BZG7 | NUFLO, INC. |
| 3491AS0723-1 | 56878 | SPS TECHNOLOGIES, LLCDBA AEROSPACE DIVISION |
Technical Data | NSN 5307-01-504-2386
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 6.250 INCHES MINIMUM AND 6.310 INCHES MAXIMUM |
| SPECIAL FEATURES | STAMP "NUT END" WITH LOW-STRESS ROUND BOTTOM DIES ON END INDICATED. (NOT TO BE USED IN HIGH-STRESS AREAS). GRADE 8 STUD |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| END ITEM IDENTIFICATION | SHEAVE DAMPER ASSEMBLY;DRIVE SYSTEM ARRANG |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY-STUD, SHEAVE DAMPER |