Part Details | SHOULDERED AND RECESSED WASHER
5310-00-238-3133 A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use BEARING, SLEEVE; BUSHING, SLEEVE; or SPACER, SLEEVE. Excludes INSULATOR, WASHER and thrust type washers.
Alternate Parts: 0N009808, 5310-00-238-3133, 00-238-3133, 5310002383133, 002383133
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | OCT 28, 1970 | 00-238-3133 | 15935 ( WASHER, SHOULDERED AND RECESSED ) |
REFERENCE DRAWINGS & PICTURES
SPRING TENSION
Cross Reference | NSN 5310-00-238-3133
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0N009808 | 98230 | NATIONAL SECURITY AGENCY |
Technical Data | NSN 5310-00-238-3133
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | 3 SPRING TENSION |
| HOLE DIAMETER | 0.323 INCHES MINIMUM AND 0.327 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.437 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| RECESS DIAMETER | 0.437 INCHES NOMINAL |
| SHOULDER HEIGHT | 0.057 INCHES NOMINAL |
| MATERIAL THICKNESS | 0.063 INCHES NOMINAL |
| SPECIAL FEATURES | HOLE OPPOSITE SHOULDER CHAMFERED 0.062 IN. BY 45 DEG |
| TEST DATA DOCUMENT | 98230-0N009808 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |