Part Details | LOCK WASHER
5310-01-248-1382 A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
Alternate Parts: FFW100, FF-W-100, MS35333141, MS35333-141, MS35333141, MS35333-141, 5310-01-248-1382, 01-248-1382, 5310012481382, 012481382
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 16, 1987 | 01-248-1382 | 14218 ( WASHER, LOCK ) |
REFERENCE DRAWINGS & PICTURES
FLAT INTERNAL TEETH
Cross Reference | NSN 5310-01-248-1382
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FF-W-100 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| MS35333-141 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS35333-141 | 80205 | NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES |
Technical Data | NSN 5310-01-248-1382
| Characteristic | Specifications |
|---|---|
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| HOLE DIAMETER | 0.440 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.580 INCHES MINIMUM AND 0.592 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND A GRADE AND 2 COMPOSITION |
| END ITEM IDENTIFICATION | MEDIUM MINE PROTECTED VEHICLE - MMPV |