Part Details | FLAT WASHER
5310-01-301-2154 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Alternate Parts: 13294667, 13294667, 5310-01-301-2154, 01-301-2154, 5310013012154, 013012154
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 25, 1989 | 01-301-2154 | 13393 ( WASHER, FLAT ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-301-2154
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13294667 | 1P230 | PHOENIX SPECIALTY MFG. CO., INC.DBA SPECIALTY WASHER CO. OF SOUTH |
| 13294667 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 5310-01-301-2154
| Characteristic | Specifications |
|---|---|
| OVERALL DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| THICKNESS | 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM |
| SPECIAL FEATURES | MATERIAL IS STEEL COMP631;SURFACE TREATMENT DOC QQ-P-35;SURFACE TREATMENT PASSIVATE;MATERIAL DOCUMENT AMS-5529 |
| TEST DATA DOCUMENT | 18876-13294667 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |