Part Details | HEADLESS SHOULDER PIN
5315-00-074-8853 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 4E20945, 5315-00-074-8853, 00-074-8853, 5315000748853, 000748853
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-074-8853 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
RADIUS
CHAMFERED
RADIUS
DRILLED THRU CENTER
Cross Reference | NSN 5315-00-074-8853
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4E20945 | 99832 | SCOTT HUBER ESSICKA CO OF FIGGIE INTERNATIONAL INC |
Technical Data | NSN 5315-00-074-8853
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 10.500 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | RADIUS |
| SECOND END CORNER RADIUS | 0.062 INCHES NOMINAL |
| FIRST END LOCATION | SHANK END |
| HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| FIRST HOLE DIAMETER | 0.250 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 4.500 INCHES NOMINAL |
| SPECIAL FEATURES | 3/8-24 IN. NF TAP HOLE 1-3/8 IN. DEEP ON STEPPED END 1/4 IN. DIA HOLE DRILLED THRU SLOT END TO MEET DRILLED HOLE THRU HORIZONTAL PLANE,KEYWAY SLOT 3/8 IN. W BY 2-1/2 IN. LONG BY 1/4 IN. DEEP LOCATED ON FIRST STEP AT A 56 DEG ANGLE W/SLOT END ON A HORIVONTAL PLANE |