Part Details | HEADLESS SHOULDER PIN
5315-00-085-2261 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: KDC 5315D40141, KDC 5315-D4014-1, 5315000852261, 11636055, 5315-00-085-2261, 00-085-2261, 5315000852261, 000852261
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 18, 1967 | 00-085-2261 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-085-2261
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| KDC 5315-D4014-1 | 3999F | DEFENSE ACQUISITION PROGRAMADMINISTRATION, R.O.K |
| 5315000852261 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 11636055 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-00-085-2261
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.500 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.875 INCHES NOMINAL |
| SHANK DIAMETER | 0.7217 INCHES NOMINAL |
| OVERALL LENGTH | 11.000 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.749 INCHES NOMINAL |
| SECOND SHANK LENGTH | 7.880 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | UNTHREADED END |
| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD SIZE | 0.875 INCHES |
| THREAD QUANTITY PER INCH | 14 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 2.620 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.256 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 4.875 INCHES NOMINAL |