Part Details | HEADLESS SHOULDER PIN
5315-00-107-5558 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 215293021, 215-29302-1, 5315-00-107-5558, 00-107-5558, 5315001075558, 001075558
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JUL 26, 1968 | 00-107-5558 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
BOTH END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-107-5558
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 215-29302-1 | 80378 | TRIUMPH AEROSTRUCTURES, LLCDBA TRIUMPH AEROSTRUCTURES - VOUGHT |
Technical Data | NSN 5315-00-107-5558
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 1.310 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.375 INCHES NOMINAL |
| SHANK DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| OVERALL LENGTH | 2.228 INCHES MINIMUM AND 2.234 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | SHANK END |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.106 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.550 INCHES NOMINAL |
| SPECIAL FEATURES | FURNISHED W/ONE PIN,SPRING AND ONE COTTER PIN |