NSN 5315-00-116-1161

Part Details | HEADLESS SHOULDER PIN

5315-00-116-1161 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.

Alternate Parts: 7685881003, 768-5881-003, 7685881003, 768-5881-003, 5315-00-116-1161, 00-116-1161, 5315001161161, 001161161

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53SEP 25, 196800-116-116116749 ( PIN, SHOULDER, HEADLESS )
REFERENCE DRAWINGS & PICTURES

CHAMFERED

CHAMFERED

BOTH END DRILLED

UNDERCUT

Cross Reference | NSN 5315-00-116-1161
Part Number Cage Code Manufacturer
768-5881-00395104ALCATEL-LUCENT HOLDINGS INC.
768-5881-00313499ROCKWELL COLLINS, INC.DBA GOVERNMENT SYSTEMS
Technical Data | NSN 5315-00-116-1161
Characteristic Specifications
STYLE DESIGNATOR UNDERCUT
SHANK LENGTH0.077 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
SHOULDER DIAMETER0.312 INCHES NOMINAL
SHANK DIAMETER0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM
OVERALL LENGTH1.882 INCHES NOMINAL
UNDERCUT DIAMETER0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
UNDERCUT WIDTH0.069 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
FIRST END STYLE CHAMFERED
FIRST END TAPER LENGTH0.031 INCHES NOMINAL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST END NOT IDENTICAL
SECOND END STYLE7 CHAMFERED
SECOND END COUNTERBORE DIAMETER0.106 INCHES NOMINAL
FIRST END LOCATION CHAMFERED END
HOLE ARRANGEMENT STYLE BOTH END DRILLED
FIRST HOLE DIAMETER0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM
SECOND HOLE DIAMETER0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.458 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN HOLES1.080 INCHES NOMINAL
SPECIAL FEATURESITEM HAS A TOTAL OF 9 HOLES EQUALLY SPACED