Part Details | HEADLESS SHOULDER PIN
5315-00-124-2234 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 1143132, 5315-00-124-2234, 00-124-2234, 5315001242234, 001242234
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-124-2234 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
ROUND
CHAMFERED
ROUND
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-124-2234
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1143132 | 88277 | BOEING COMPANY, THEDBA BOEING |
Technical Data | NSN 5315-00-124-2234
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| SHANK DIAMETER | 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| OVERALL LENGTH | 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.1846 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 44.5 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | ROUND |
| SECOND END TAPER LENGTH | 0.031 INCHES NOMINAL |
| SECOND END OUTER RADIUS | 0.005 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END LOCATION | SHORT SHANK END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.062 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |