Part Details | HEADLESS SHOULDER PIN
5315-00-126-5738 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 4G53764101A, 4G53764-101A, 4G53764101A, 4G53764-101A, 5315-00-126-5738, 00-126-5738, 5315001265738, 001265738
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 04, 1968 | 00-126-5738 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-126-5738
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4G53764-101A | 17772 | AERO ENGINEERING & MANUFACTURINGCOMPANY OF CALIFORNIA |
| 4G53764-101A | 98897 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 5315-00-126-5738
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.562 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.330 INCHES NOMINAL |
| SHANK DIAMETER | 0.242 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| OVERALL LENGTH | 1.810 INCHES NOMINAL |
| SECOND SHANK LENGTH | 1.188 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | BOTH ENDS |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.458 INCHES NOMINAL |