Part Details | HEADLESS SHOULDER PIN
5315-00-132-2717 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 0N080044, 5315-00-132-2717, 00-132-2717, 5315001322717, 001322717
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 13, 1968 | 00-132-2717 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
POINTED
CHAMFERED
POINTED
UNDERCUT
Cross Reference | NSN 5315-00-132-2717
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0N080044 | 98230 | NATIONAL SECURITY AGENCY |
Technical Data | NSN 5315-00-132-2717
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | UNDERCUT |
| SHANK LENGTH | 0.481 INCHES NOMINAL |
| SHOULDER WIDTH ACROSS FLATS | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SHANK DIAMETER | 0.164 INCHES NOMINAL |
| OVERALL LENGTH | 1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.108 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM |
| SECOND UNDERCUT WIDTH | 0.094 INCHES NOMINAL |
| SECOND UNDERCUT DIAMETER | 0.118 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.243 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.770 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | POINTED |
| SECOND END TAPER LENGTH | 0.156 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 30.0 RADIANS NOMINAL |
| FIRST END LOCATION | THREADED END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.164 INCHES |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.461 INCHES NOMINAL |